The Polycarbonate seals will be conformed to the following specification as under:

1. Material of Plastic Seal:
The raw material used for polycarbonate plastic seals shall be of M/s. Dow Caller Ltd. Switzerland (Grade 201-15) M/s. GE Plastic, Singapore (Grade 143R), M/s. Du Pont, Japan (Grade LV-11, U.V. Stabilize) or any other equivalent manufacturer having similar material properties as under:

2. Colour of seal.
The seals will be colorless, transparent (See through) Type, which shall give complete visualization of its fixing mechanism and shall show clear indication if tempered. Also seals can be available in different colour like Red, Blue, Yellow, Green, and Orange etc.

3. Design and Construction of seal.
a. Design:
The Seal will be Anchor type temper evident with double locking system as per drawing no. AP – 05 & 06 attached with the specification only.
b. Size of the Seal:
      The size of the female part of the seal shall be as under:

1. Size: 18 x 14 x 7 mm + 0.5 mm
2. Size of the hole of female part: The size of the hole shown in the drawing should be sufficient to insert seal wire, but in no case, more than 1.0 mm + 0.1 mm.
3. Wall thickness should be 0.8 mm (No negative tolerance).

c. Serial No. of the seal:
      Non repeat seven digits Sr. Nos. with code no. on the seal shall be embossed and it shall not be screen printed and it should be provided on male and female portion at the place mentioned in the drawing i.e. on the top in male part and on the side in female part. Please note that Sr. No. of seal shall not be embossed after the seal is manufactured. The size of the digit shall be 1.5 X 2.5 mm (W X H).

c-2 also seals have special features like neon text coding on anchor part of seals, and should have facility to have UV numbering on seals(i.e. same serial number of seals should be UV visible) this numbers are visible only by ultra violet light.

d. Monogram:
The seal have monogram of Company logo in 8 mm circle on front side and month& year in figure on backside in 8 mm circle.
e. Seal wire.
The non corrosive non magnetic as per is 304 stainless steel twisted wire (26 SWG) shall be used as under. The seal wire shall not have affect of magnet. i.e. it should not attract to magnet.
1.    On seal open wire stainless steel twisted of 26 SWG. Of 160 mm (Or as per client requirement)
Length and 65 mm + 5.0 mm. Molded wire as shown in the drawing.  

The diameter of each individual strand wire shall be 0.45 mm (approx) (26 SWG) and over all diameters of seal wire shall be 0.9 mm + 0.05 mm, so that it can easily insert into the female portion where the diameter of the hole shall be 1.0mm + 0.1mm.

2.    The seal wire used for the above size of seals shall be inbuilt in connecting male and female part of the seal as shown in the drawing and as per the above dimensions. The application of the seal wire is to insert seal wire and through   the hole via female part and insert the male part into female part by applying thumb pressures to lock the seal.
4. General Construction:-
The seal shall be designed for a single use only and if           
Tempered with the help of puller, knife or any other sharp instruments, the seal shall be damaged and due to its see through property. The sign internal of tempering shall be easily detected. Also once opened, it cannot be re-used. The Seal shall be made in such a way that, it can be easily locked with the help of finger and thumb pressing and no tools shall be required to close the seal in the laboratory

Or at site. After inserting the seal wire through female pare, the cap of the male part shall be fitted in the female part in such a way that it should not leave any space to avoid insertion of any sharp tools for opening of seal body of the female part in hot or cold condition. The seal shall have also the following features.

1. Temper resistance and reliable.
2. Environmentally safe as it does not contain any lead.
3. Withstand long-term exposure to direct sunlight.
4. Tools not required for Installation.
5. Transparent and see through body reveals
6. Heat resistance.
7. Chemical resistance